REPAIRS
[WHEN TO HIRE] 10 MIN READ

How Much Does It Cost to Install or Replace a Storm Door?

How Much Does It Cost to Install or Replace a Storm Door?

A storm door can be a pretty simple installation. It can also turn into a repair job once you start looking at what the door is actually attaching to.

The door itself, the labor, and the condition of the existing opening are the biggest factors. If the opening is solid, the trim is in good shape, and the new door is the right size, installation is usually straightforward. If you find rotten brick moulding, a damaged jamb, or mounting points that won’t hold a screw, you’ve got more than a door installation on your hands.

What Affects the Cost?

There are several things that can change the price of a storm-door installation.

The door. Basic, full-view, mid-view, high-view, and retractable-screen doors all have different prices. Some also take more time to install or adjust.

The material. Aluminum and vinyl doors are common, but heavier doors and models with upgraded features can cost quite a bit more.

Labor. Swapping one storm door for another in a good opening is relatively simple. Fitting a door, correcting alignment, making repairs, or dealing with an odd opening takes more time.

The existing frame. This is one of the big ones. A storm door needs something solid to attach to. Rot in the jamb can make that difficult or, in some cases, make proper installation impossible until the wood is repaired.

Exterior trim. Damaged brick moulding can cause fit and mounting problems. If it’s badly deteriorated, putting a new storm door over it isn’t really fixing anything.

Hardware and removal. Handles, latches, closers, sweeps, and other hardware may need to be installed or adjusted. And if you’re replacing an existing door, somebody has to remove and dispose of the old one.

The Door Itself

Storm doors vary more than you might expect.

A basic aluminum or vinyl door may be all you need for a straightforward replacement. Other models have full-view glass, interchangeable screens, retractable screens, or upgraded hardware. Those features add to the cost, but they can also make the door more useful.

Think about how you’ll actually use it.

If you mainly want the storm door for ventilation, pay attention to the screen design. Some doors use a full-door screen or window that has to be removed and swapped out. That’s fine if you only change it occasionally. If you want to go from closed to screened several times a day, it can get old pretty quickly.

A retractable screen is worth a look in that situation. The screen stays part of the door, so you can open it without having to store or change out another panel.

The Condition of the Existing Opening

This is where a simple storm-door replacement can get more complicated.

The new door needs a solid surface to attach to. If the wood around the opening has deteriorated, installing a new door over it doesn’t fix the problem. It just puts a new door on a bad mounting surface.

Two areas deserve particular attention.

Rotted brick moulding. Brick moulding is the exterior trim around many doors. When it starts to rot, the storm door may not have a solid or properly shaped surface to mount against.

Rot in the door jamb. The jamb is the framework around the door. If it has deteriorated, fasteners and hardware mounted into that wood may not hold for long.

The closer is a good example. Every time the storm door opens and closes, the closer puts force on its mounting bracket. If the wood behind that bracket is soft or rotten, the bracket can eventually pull loose.

So if a storm door won’t stay open, won’t close properly, or the closer keeps coming loose, don’t automatically blame the hardware. The wood behind it may be the real problem.

Trim Matters More Than You Might Think

Before you order a replacement, take a good look at the brick moulding and the other surfaces the door will attach to.

If the trim is solid and the opening meets the new door’s requirements, installation may be pretty uneventful.

If the trim is deteriorated, though, replacing the storm door without dealing with it first can leave you right back where you started, with a door that doesn’t fit or hardware that won’t stay attached.

That’s why measuring the opening and checking the mounting surfaces should happen before you buy the door. Not after.

Removing the Old Door

Replacing a storm door usually involves a little more than putting the new one in place.

The existing door and its hardware have to come out, and the old door has to go somewhere. Sometimes removal also exposes damage that wasn’t obvious beforehand.

That’s worth knowing when you get an estimate. Ask whether removing and disposing of the old door is included. The same goes for minor repairs. You don’t want to find out halfway through the job that those are being treated as separate charges.

DIY or Professional Installation?

A storm door is a reasonable DIY project for a lot of homeowners. You don’t automatically need a professional just because it’s an exterior door.

DIY is usually reasonable if:

  • You’re replacing a similar door in an existing opening.

  • The opening is reasonably square.

  • The jamb and brick moulding are solid.

  • You can measure the opening accurately.

  • You’re comfortable drilling and driving exterior fasteners.

  • You have the basic tools called for in the manufacturer’s instructions.

  • You’re willing to make the adjustments needed to get the door closing and latching correctly.

The mistake I see homeowners make is thinking the job is just a matter of attaching the new door to the old opening.

It isn’t quite that simple.

The door has to be positioned correctly, and the opening has to give you a good surface to work with. If either one is off, you can spend a lot of time chasing a problem that isn’t obvious at first.

A professional installation makes more sense if:

  • The existing trim is rotted.

  • The jamb has deteriorated.

  • The opening is badly out of square.

  • The mounting surface needs repair.

  • The replacement door doesn’t fit the existing opening.

  • The closer or latch keeps pulling loose.

  • You’re not comfortable cutting or modifying installation components.

  • You want the old door removed and disposed of at the same time.

And the extra cost isn’t simply paying someone to turn a screwdriver for you. When the opening needs repairs or the door requires additional fitting and adjustment, there’s actual additional work involved.

Common Mistakes

Buying the Door Before Checking the Opening

Don’t assume that because your old storm door fit, the new one will too.

Measure the opening using the manufacturer’s instructions before you buy. Storm doors have different mounting requirements, and a nominal 32-inch or 36-inch door doesn’t mean every opening with those dimensions will work.

Assuming the Storm Door Is the Problem

If the closer keeps pulling loose, replacing the closer might not accomplish anything.

Look at the wood behind the mounting bracket. If it has rotted, there may simply be nothing solid for the bracket to hold onto.

Ignoring Deteriorated Brick Moulding

Exterior trim affects both the fit of the door and how securely it can be attached.

If the brick moulding is failing, deal with that before expecting a new storm door to solve the problem.

Choosing the Wrong Screen Design

Think about how often you’ll actually use the screen.

If you want ventilation every day, repeatedly removing and changing a screen or window panel can become a nuisance. A retractable screen may make more sense if you want to switch between screened and closed operation quickly.

Skipping the Final Adjustments

Getting the door physically installed doesn’t necessarily mean the job is finished.

The latch, closer, sweep, and other hardware may need some adjustment. The goal is for the door to close and latch without having to fight it or slam it.

What to Look For When Buying a Storm Door

Start with how you use the entryway.

If visibility is the priority, a full-view design may be the better choice.

If you want ventilation frequently, look closely at the screen system rather than just the appearance of the door. A retractable screen can be more convenient when you’re switching between an open screen and a closed door regularly.

For a basic replacement, a straightforward aluminum or vinyl door may be perfectly adequate. There’s no reason to pay for features you won’t use.

And if the existing opening has problems, inspect it before buying anything. Check the brick moulding, jamb, and mounting surfaces first.

Pay attention to the manufacturer’s measurement requirements, too. A door labeled “32-inch” or “36-inch” is not a guarantee that it will fit every opening with those measurements.

When to Call Wingman

If you already bought the storm door, or you know which one you want, Wingman can handle the installation and the problems that sometimes show up along the way.

That can include removing the existing storm door, installing the replacement, installing and adjusting the hardware, and dealing with minor problems with the trim or mounting surface.

If the brick moulding is deteriorated, that may need to be replaced. Minor jamb repairs may also be possible, depending on the condition of the opening.

The important thing is figuring out what you’re dealing with before assuming it’s just an installation.

Request an estimate from Wingman if you’d rather have someone look at the opening and handle the installation for you.

FAQ

Can I install a storm door myself?

Yes. If the opening is solid and reasonably square, and you’re comfortable measuring, drilling, and making adjustments, a straightforward replacement is a reasonable DIY project.

Why won’t my new storm door fit correctly?

The opening may not be the size or shape the new door requires. The brick moulding or jamb may also be damaged.

Don’t assume the door itself is defective until you’ve checked the opening and the surfaces it needs to attach to.

Why does my storm-door closer keep pulling loose?

The wood behind the closer bracket may be deteriorated. If the jamb has rotted, the bracket may not have enough solid material to hold against the repeated force of the closer.

Should I replace rotted brick moulding before installing a storm door?

If the brick moulding is part of the mounting surface and has deteriorated, it should generally be repaired or replaced first. Installing the new door against failing wood isn’t going to make the problem disappear.

Is a retractable screen worth considering?

If you regularly want airflow through the screen, it can be. A retractable screen is easier to use than a system that requires you to remove and change a full-door screen whenever you want ventilation.

Final Takeaway

For a straightforward storm-door replacement, you’re mainly paying for the door and the labor to install it.

But don’t overlook the opening itself. The condition of the brick moulding, jamb, measurements, and mounting surfaces can have just as much impact on the job as the door you buy.

If everything is solid and the door fits, this can be a perfectly reasonable DIY project. If the wood is deteriorated or you keep having problems with a closer, latch, or door alignment, take a closer look before replacing hardware or buying another door.

Sometimes the storm door isn’t the problem. The stuff it’s attached to is.

WINGMAN SERVICES

Rather have Wingman do it?

Get a quote and let a pro handle it. Your weekend stays yours.

REQUEST A QUOTE