How Much Does It Cost to Replace or Install an Exterior Door?

Replacing an exterior door can cost anywhere from a few hundred dollars for a straightforward installation to several thousand dollars when you add a higher-end door, custom sizing, frame repairs, or changes to the opening. The door itself is only part of the project. Labor, the condition of the existing frame, trim, threshold, weather sealing, and unexpected rot or water damage can all change the final price.
Quick Answer
For budgeting purposes, don’t look at the price of the door by itself. Look at the entire installation.
A basic exterior-door project might include:
Project component
What can affect the cost
Door
Steel, fiberglass, wood, glass, sidelites, quality
Door configuration
Slab, prehung, single, double, custom
Labor
Installation difficulty and condition of opening
Existing frame
Sound frame vs. damaged or rotten jamb
Threshold
Reuse vs. replacement
Trim
Reuse, repair, or replacement
Weather sealing
Weatherstripping, sealant, flashing and related work
Removal
Removing and disposing of the old door
Finish work
Painting, staining or refinishing
Framing
Usually a separate consideration when changing the size of the opening
Published cost estimates vary widely because exterior-door projects vary widely. National sources put basic exterior-door installation in the hundreds of dollars for labor and installation, while broader project estimates can reach several thousand dollars when the scope becomes more complicated. Kansas City estimates also vary depending on the type of door and installation involved.
For that reason, a contractor’s estimate is more useful when it explains what is included than when it simply gives you one number.
[Internal link: Cost to Install a Storm Door]
What Affects the Cost?
The door itself is only one part of the price
A common mistake is to shop for a $500 door and assume the project will cost roughly $500.
It won’t necessarily.
The installer still has to remove the old door, prepare the opening, install and align the new unit, secure it correctly, make sure it operates properly, and seal it against the weather. There may also be trim, threshold, hardware, painting or repair work.
A better way to think about the project is:
Door + installation + removal + materials + repairs + finish work = total project cost
The more of those items your project needs, the farther the final price can move from the price tag on the door.
The condition of the existing opening matters
This is one of the biggest reasons an exterior-door estimate can change.
You may see a door and a frame that look perfectly acceptable from inside the house. Once the old jamb is removed, the installer may find rot or other damage that wasn’t visible beforehand.
An experienced installer we interviewed specifically pointed to this as a common surprise: removing the old jamb can reveal underlying wood rot or damage that wasn’t apparent during the initial inspection.
That doesn’t mean every old door has hidden damage. It means the condition behind the existing assembly can be difficult to know with certainty until the door and jamb are removed.
Potential problems include:
-
Rotten wood
-
Water damage
-
Damaged jambs
-
A threshold that needs replacement
-
An opening that isn’t square
-
Damaged or deteriorated trim
-
Framing problems
-
Previous installation problems
If significant damage is discovered, the project may become partly a repair job before the new door can be installed.
Standard vs. custom dimensions
A standard replacement is generally simpler than modifying an opening to accommodate a different-size door.
If the existing opening works with a readily available door, you have more options.
If you want a substantially different size, unusual configuration, or custom dimensions, the project can involve additional labor, materials and potentially framing work.
This is especially important if you’re considering replacing a single door with a larger unit or changing the size of the opening.
Door material and configuration
The material and design you choose also affect the price.
Steel doors are commonly available at relatively accessible price points and can be a practical choice for many entry applications.
Fiberglass doors are available in a wide range of styles and finishes and can cost more depending on the product.
Wood doors can offer a particular appearance and may require more maintenance or finishing depending on the product.
Then there are configuration choices:
-
Glass panels
-
Decorative glass
-
Sidelites
-
Double doors
-
Custom designs
A basic single door and a large entry system with sidelites are both technically “exterior doors,” but they aren’t remotely the same project.
Slab vs. prehung replacement
This distinction is easy to miss when comparing prices.
A door slab is essentially the door itself. The existing frame and jamb remain in place.
A prehung door comes as a door already mounted in its frame/jamb assembly.
Those are different scopes of work.
A slab replacement can make sense when the existing frame is in good condition and the replacement door is compatible with it. But fitting a new slab to an existing opening isn’t necessarily simple.
The installer we interviewed noted that matching a new slab to existing hinges and getting the fit right can be challenging. If the fit is off, the door may not operate properly.
A prehung replacement replaces the door and frame assembly together. That can be a better approach when the existing jamb is damaged or when the existing assembly isn’t suitable for the new door.
Finish work can add to the project
The door may be installed correctly and still need additional work before the job is finished.
Depending on the project, that could include:
-
Replacing trim
-
Touching up exterior finishes
-
Painting
-
Staining
-
Refinishing
If you want specialized finishing, such as professional spray painting, that may be better handled by a painter rather than included in a standard door-installation scope.
Structural changes are a different project
Replacing a door with another door of the same general size is one thing.
Making the opening significantly larger is another.
For example, changing a standard single-door opening to accommodate a substantially larger entry system may require framing changes. Depending on the situation, structural design or engineering may also be required.
At that point, don’t treat the project as a normal door replacement.
Detailed Explanation
Why getting the door square matters
Exterior-door installation isn’t simply a matter of putting the new unit into the opening and attaching it.
The installer has to get the assembly properly positioned and aligned.
One installer we interviewed described getting a door square as one of the more challenging parts of the job.
That matters because a door that isn’t properly aligned may have problems with:
-
Opening and closing
-
Latching
-
Clearance around the frame
-
Contact with weatherstripping
-
Overall fit
The installer we interviewed uses a six-foot level, a pneumatic nailing gun, and the appropriate nail and screw sizes for this type of work.
You don’t necessarily need those exact tools for every door project, but they illustrate an important point: proper installation involves more than hanging a door on its hinges.
Don’t assume a drafty or sticking door needs replacement
A door that is difficult to close, won’t latch properly, or lets in air may have a problem that doesn’t require replacing the entire door.
Depending on the cause, the solution might involve:
-
Adjusting the door
-
Replacing weatherstripping
-
Replacing a door sweep
-
Adjusting or replacing hardware
-
Correcting alignment
[Internal link: How to Fix a Drafty Exterior Door]
[Internal link: Why Won’t My Door Close?]
[Internal link: How to Fix a Door That Won’t Latch]
[Internal link: How to Fix a Door That Rubs Against the Frame]
If the door and frame are otherwise sound, repairing the problem may make more financial sense than replacing the entire assembly.
What should be included in an exterior-door estimate?
Don’t compare estimates based solely on the number at the bottom.
Two contractors can quote different amounts because they’re including different work.
A useful estimate should make clear:
-
What door is being installed
-
Door size and configuration
-
Whether it is slab or prehung
-
Whether the old door is being removed
-
Whether disposal is included
-
Whether hardware is included
-
Whether the existing threshold will be reused
-
Whether trim is included
-
What weather sealing is included
-
Whether repairs to the opening are included
-
Whether painting or staining is included
-
What labor is included
-
What happens if concealed damage is discovered
If one contractor quotes $900 and another quotes $1,400, the more expensive quote isn’t automatically worse.
The real question is:
Are you comparing the same scope of work?
What happens when hidden damage is discovered?
This is one of the situations where homeowners should expect some uncertainty.
An installer can inspect the visible parts of the opening before starting, but some damage may be concealed behind the existing jamb or trim.
If significant rot or water damage is discovered after removal, the contractor should explain:
-
What was found
-
Why it needs to be repaired
-
What additional work is required
-
What the additional cost will be
A legitimate change in scope is different from an unexplained price increase.
If the damage extends beyond a straightforward door-opening repair, another trade may be appropriate.
Options and Comparisons
Repair vs. replace
Situation
Likely starting point
Door is drafty but otherwise sound
Inspect weatherstripping/seal
Door rubs or sticks
Investigate alignment
Handle or lock is failing
Repair/replace hardware
Door slab is damaged but frame is sound
Consider slab replacement
Door and frame are both deteriorated
Consider prehung replacement
Significant rot is discovered
Repair damage before replacement
Homeowner wants a substantially larger opening
Evaluate framing/structural requirements
This isn’t a diagnosis. The point is to avoid assuming that every door problem requires a new door.
Slab vs. prehung vs. opening modification
Option
What changes
Best suited to
Slab replacement
Door only
Sound, compatible existing frame
Prehung replacement
Door + frame/jamb assembly
Damaged or unsuitable existing frame
Door + opening repair
Door plus repairs around existing opening
Rot, water damage or deteriorated components
Structural opening modification
Size/structure of opening changes
Larger or substantially different door configurations
The farther down this list your project goes, the less useful a generic “average door replacement cost” becomes.
Common Mistakes
Buying the door before determining what you actually need
Measure the existing door and inspect the opening before ordering a replacement.
A new door that doesn’t match the opening, handing, frame or hardware requirements can create an expensive problem.
Comparing door prices instead of project prices
A $400 door isn’t necessarily a $400 project.
Compare the complete scope.
Assuming the existing frame can be reused
It may be fine. It may not.
Look for visible deterioration, water damage and other problems, but recognize that some damage may not be visible until the existing assembly is removed.
Assuming slab replacement is always easier
A replacement slab has to work with the existing frame, hinges, clearances and hardware. Getting everything to fit correctly can be challenging.
Ignoring weather sealing
A door that looks good but doesn’t seal properly isn’t a successful installation.
Weather sealing should be part of the project discussion, not an afterthought.
Choosing the cheapest estimate without comparing scope
The lowest number isn’t necessarily the cheapest project if it leaves out trim, disposal, repairs, hardware or finish work that you’ll have to pay for later.
DIY vs. Hiring a Professional
A straightforward exterior-door replacement can be within the capabilities of an experienced DIYer.
The key word is straightforward.
DIY becomes more reasonable when:
-
The opening is a standard size
-
The existing framing is sound
-
You’re replacing the door with a compatible unit
-
You have the necessary tools
-
You understand how to measure, level, shim and fasten the assembly
-
You’re comfortable correcting minor fit and alignment issues
The installer we interviewed gave a simple test for deciding when not to DIY:
If you don’t have the right tools or the skills necessary to complete the job, don’t take it on.
That’s a better rule than assuming every homeowner needs a professional.
When professional installation makes more sense
Consider hiring a professional if:
-
You’re unsure how to measure the existing opening
-
The jamb or frame is damaged
-
You find rot or water damage
-
The opening isn’t square
-
You’re replacing the entire prehung assembly and aren’t comfortable with installation
-
The door isn’t fitting or latching correctly
-
You’re changing the size of the opening
-
Significant framing work is required
-
Engineering may be necessary
Exterior doors are heavy, and removing an existing assembly can expose concealed problems. Proper installation also affects fit, operation and weather sealing.
[Internal link: DIY vs. Hiring a Handyman]
What to Look For When Choosing an Installer
You don’t need a contractor who gives you the longest explanation. You need one who clearly defines the work.
Ask:
-
Are you replacing the slab or the complete prehung unit?
-
Is the existing frame being reused?
-
What happens if rot is discovered?
-
Is removal and disposal included?
-
Is new hardware included?
-
Is trim included?
-
How will the new door be sealed?
-
Is painting or staining included?
-
What isn’t included in the quote?
-
How are unexpected repairs handled?
Most importantly, make sure you’re comparing the same scope between contractors.
If one quote includes a new prehung door, disposal, trim and sealing while another only covers installation labor, the two numbers aren’t comparable.
When to Call Wingman
If you know the exterior door needs to be replaced but aren’t sure exactly what the project involves, Wingman can help define the scope and handle a straightforward exterior-door replacement or installation.
That can include evaluating the existing door and jamb, determining whether the project calls for a slab or prehung replacement, and identifying visible issues that may affect the work.
If the project involves major structural changes, specialized finishing, or work outside a straightforward door replacement, another specialist may be the better choice.
If you’re ready to find out what your particular door project will cost, request a Wingman estimate.
Related Resources
[Internal link: How to Fix a Drafty Exterior Door]
[Internal link: How to Replace Door Weatherstripping]
[Internal link: Why Won’t My Door Close?]
[Internal link: How to Fix a Door That Won’t Latch]
[Internal link: How to Fix a Door That Rubs Against the Frame]
[Internal link: Cost to Install a Storm Door]
[Internal link: Cost to Replace Door Hardware]
[Internal link: Cost to Install Trim Around Doors and Windows]
FAQ
Is it cheaper to replace a door slab or a prehung door?
A slab replacement can require less work when the existing frame is sound and the new slab is compatible. But fitting a new slab to an existing frame can be challenging. A prehung replacement replaces the door and frame together and may make more sense when the existing jamb is damaged or unsuitable.
Why can exterior-door replacement estimates vary so much?
The door is only one part of the project. Door type, size, installation difficulty, frame condition, rot, water damage, trim, threshold, hardware, weather sealing and finish work can all affect the price.
Should I replace my door if it is sticking?
Not necessarily. A sticking door can sometimes be corrected through adjustment, alignment or repair. If the door or frame is damaged, replacement may make more sense.
[Internal link: Why Won’t My Door Close?]
Should I buy the door myself?
You can, but make sure you know exactly what you’re buying before ordering it. Door size, handing, configuration, frame dimensions and compatibility all matter. If you’re unsure, having the installer help specify the door can reduce the risk of buying the wrong unit.
What should I do if I find rot around my exterior door?
Don’t simply cover it with the new door. Determine how extensive the damage is and repair the affected area before completing the installation. Significant damage extending into the structure may require a specialist.
How do I know whether I need a new frame?
If the existing jamb is damaged, rotten, badly deteriorated or incompatible with the replacement door, replacing the frame as part of a prehung unit may make more sense. The condition of the existing opening should be evaluated before deciding.
Final Takeaway
The most useful number isn’t the price of the door sitting on the store shelf. It’s the cost of getting your particular door, frame and opening properly replaced and finished.
Before comparing estimates, determine whether you’re looking at a repair, slab replacement, prehung replacement, or a project involving repairs to the opening. Then compare contractors based on the same scope of work.
If you’re in the Kansas City area and want someone to evaluate the project and provide an estimate, request a Wingman estimate for your exterior-door replacement or installation.
WINGMAN SERVICES
Rather have Wingman do it?
Get a quote and let a pro handle it. Your weekend stays yours.
