How Much Does It Cost to Install Bathroom Accessories?

Short answer: Bathroom accessory installation can range from a small, straightforward job to a several-hundred-dollar bathroom upgrade, depending on how many items you want installed and what is involved. Towel bars and toilet-paper holders are relatively simple. Mirrors, lighting, tile installations, damaged walls, and accessories that need stronger mounting can take considerably more time. The biggest cost factors are labor, the number and type of accessories, mounting hardware, wall conditions, and removal of old items.
Quick Answer
If you’re installing several bathroom accessories at once, it’s usually more useful to think about the whole project than the cost of each individual item.
For example, a bathroom refresh might include:
-
Two towel bars
-
A towel ring
-
A toilet-paper holder
-
Two robe hooks
-
A new mirror
-
Bathroom lighting
The accessories themselves could cost anywhere from relatively little to several hundred dollars depending on what you buy. Installation is a separate cost unless the contractor provides the products as part of the job.
For a simple installation, the work may involve little more than measuring, leveling, drilling and securing the hardware. A more complicated job can involve finding suitable mounting points, drilling tile, repairing old holes, removing existing fixtures, installing a mirror or dealing with electrical work for new lighting.
That’s why a quote based only on the number of accessories can be misleading.
What Affects the Cost?
The number of accessories
One of the simplest ways to control the cost is to have several items installed during the same visit rather than treating every item as a separate project.
A homeowner who wants a towel bar installed today, a mirror next month and two robe hooks later may end up spending more on service calls than someone who plans the whole bathroom hardware installation at once.
If you’re already refreshing the bathroom, make a list of everything you want mounted before requesting an estimate.
The type of accessory
Not everything mounted on a bathroom wall is the same kind of job.
A lightweight robe hook is pretty simple. A large mirror is another matter. So is a grab bar, which needs to be mounted securely enough to support a person.
Lighting can add another layer of complexity because electrical work may be involved. Don’t assume installing a new light fixture is the same type of handyman task as installing a towel ring.
The mounting hardware
This is one place where spending a little more attention can prevent a much bigger problem later.
The right mounting hardware matters. Whenever possible, mounting into a wall stud provides stronger support. If a stud isn’t located where you want the accessory, the alternative is to use an appropriate anchor for the wall and the weight the accessory needs to carry.
This is where many inexpensive accessory installations go wrong.
A lot of bathroom hardware comes with small plastic drywall anchors. They’re convenient, but they aren’t automatically the right choice for every application. In particular, they’re a poor choice when the accessory will be subjected to significant force or will regularly carry heavier items.
The hardware should be selected based on what you’re mounting, how much load it will see, and what the wall is made of.
The wall itself
Drywall is relatively straightforward. Tile requires more care.
Drilling through ceramic or porcelain tile isn’t impossible, but it requires the right bit and technique. A mistake can chip or crack the tile. The mounting method also needs to account for what’s behind the tile.
If you’re mounting something in a shower or another wet area, the situation deserves additional attention because you’re penetrating a surface that may be part of the bathroom’s waterproofing system.
Existing accessories
Removing old hardware can be easy, or it can expose a problem.
An old towel bar may have pulled loose from the drywall. An old mirror may have left holes or damaged paint. Previous installations may have used inadequate anchors, leaving the wall in worse condition than it appears at first glance.
If the wall needs repair before the new accessory can be installed, you’re no longer paying for a simple installation.
Removal and disposal
If you’re replacing existing bathroom hardware, find out whether removal and disposal are included in the estimate.
A homeowner can certainly remove a towel bar or toilet-paper holder before the installer arrives. That can make the installation quicker, provided the old hardware comes off cleanly and doesn’t create additional wall damage.
Mirrors and Bathroom Lighting Are Different Jobs
Mirrors and lighting are worth separating from ordinary bathroom accessories because they can change the scope of the project.
A small frameless mirror may be relatively straightforward. A large, heavy or framed mirror needs an appropriate mounting system and a suitable attachment point. You don’t want to find out after installation that the wall anchor wasn’t designed for the load.
Lighting can involve electrical connections rather than simply attaching something to the wall. If the job involves adding wiring, moving an electrical box, installing a new circuit, or otherwise modifying the electrical system, it may need to be handled by a qualified electrician and may have permit implications depending on the location and scope of the work.
Don’t assume that because a fixture is sold as a bathroom accessory, every part of its installation is a handyman task.
One newer option worth considering is LED lighting with adjustable color temperature. Many current LED fixtures let you choose between a cooler, brighter appearance and a warmer, softer appearance. That gives you more control over how the bathroom feels without changing the entire lighting scheme.
What Can Reduce the Cost?
There are a few practical things you can do before the installer arrives.
Have the accessories purchased and ready. This eliminates a product-selection trip and makes it clear exactly what is being installed.
Install several items during the same visit. Ask how the contractor prices multiple items. A single larger project may make more sense than several small service calls.
Decide on placement ahead of time. You don’t need to know the exact mounting hardware, but you should have a good idea where you want the towel bars, hooks, mirror and other items.
Remove old hardware yourself if you’re comfortable doing so. Stop if something starts pulling drywall apart or you discover water damage.
Tell the installer about tile, stone or unusual wall surfaces before the appointment. That gives them a chance to bring the appropriate tools and hardware.
What Can Increase the Cost?
The opposite is also true. Expect the job to become more involved when it includes:
-
Several separate installation locations
-
Heavy mirrors or accessories
-
Tile or stone drilling
-
Damaged drywall
-
Existing hardware that is difficult to remove
-
Replacement or repair of mounting surfaces
-
Accessories that need stronger attachment
-
New or modified lighting
-
Work in a wet area
-
Electrical or plumbing work outside the original scope
A useful estimate should account for these conditions rather than pretending every bathroom accessory takes the same amount of time.
DIY vs. Hiring a Professional
For many homeowners, installing basic bathroom hardware is a reasonable DIY project.
If you’re comfortable measuring, drilling and using a level, you can probably handle a lightweight towel ring, robe hook or toilet-paper holder, assuming you understand the wall you’re drilling into and use suitable hardware.
A towel bar is also manageable for many DIYers. The tricky part isn’t putting the screws in. It’s getting the location right and making sure the attachment will hold up to repeated use.
A professional becomes more useful when the installation involves:
Situation
DIY?
Professional makes more sense when…
Lightweight robe hook
Usually reasonable
Wall condition is questionable
Toilet-paper holder
Usually reasonable
Existing holes or loose drywall need repair
Towel ring
Usually reasonable
You want several accessories installed together
Towel bar
Reasonable with basic skills
Stronger mounting or wall repair is needed
Large mirror
Depends on size and mounting
The mirror is heavy or difficult to handle
Tile installation
Possible for experienced DIYers
You aren’t comfortable drilling tile
Shower accessory
Depends on location
Waterproofing or tile penetration is a concern
Grab bar
Not a place to guess
It needs reliable structural attachment
New/modified lighting
Depends on scope
Electrical wiring or other electrical work is involved
The important thing is not whether you can drill a hole. You probably can.
The question is whether you know what should be behind that hole and whether the hardware you’re using is appropriate for the load.
Common Mistakes
Using the cheap plastic anchor because it came in the package
This is probably the easiest mistake to make. The accessory manufacturer can provide mounting hardware, but that doesn’t mean the supplied anchor is the best choice for your particular wall.
If the accessory will carry weight or see repeated pulling and pushing, pay attention to the mounting method.
Guessing where the stud is
If you’re trying to hit a stud, don’t assume you know where it is based on the location of another fixture. Use a stud finder or another reliable method of locating the framing.
And remember that a stud may not be located exactly where you want the accessory.
Drilling tile without the right equipment
Don’t reach for an ordinary drill bit and hope for the best. Tile can be unforgiving, particularly if you’re dealing with expensive or difficult-to-replace material.
Installing before deciding where everything belongs
Stand back and look at the bathroom as a whole.
A towel bar that looks fine by itself may interfere with a cabinet door. A robe hook can end up behind a door. A mirror can make the lighting placement look awkward. Small decisions add up.
Treating a grab bar like a towel bar
Don’t.
A towel bar is decorative hardware that happens to hold towels. A grab bar is intended to support a person. The attachment method needs to reflect that difference.
When to Call Wingman
Wingman can make sense when your bathroom project has moved beyond one quick installation.
For example, if you’ve bought a new set of towel bars, a toilet-paper holder, robe hooks and a mirror and want everything installed properly, that’s a more substantial project than hanging one accessory.
It’s also worth getting help if you’re dealing with tile, damaged drywall, difficult mounting locations or several small bathroom improvements that need to be coordinated.
The useful part of having a handyman handle the project isn’t just the drilling. It’s figuring out the mounting method, getting the layout right, dealing with the surprises behind the old hardware and leaving you with a finished bathroom rather than a pile of parts.
Want to know what your bathroom accessory project would cost? Request a Wingman estimate and provide a list of the items you want installed.
Related Resources
If you’re tackling the work yourself, these guides are useful next steps:
-
How to Install a Towel Bar Without It Falling Off, [internal link]
-
How to Fix a Loose Toilet Paper Holder, [internal link]
-
How to Find a Stud Behind Drywall, [internal link]
-
How to Hang Something Heavy Without a Stud, [internal link]
-
How to Fix a Loose Wall Anchor, [internal link]
-
Why Does My Bathroom Caulk Keep Failing?, [internal link]
-
How to Recaulk a Shower, [internal link]
-
How to Repair Cracked Bathroom Grout, [internal link]
FAQ
Is it cheaper to install several bathroom accessories at once?
It can be. If the contractor has a minimum service charge or charges for travel and setup, combining several items into one visit may be more economical than scheduling multiple small jobs. Ask how the contractor prices multiple installations rather than assuming there is a standard discount.
Should I buy the bathroom accessories myself?
You can. Buying them yourself gives you control over the style, size and price. Just make sure the accessories are actually appropriate for the location and that the mounting hardware can work with your wall.
Do bathroom accessories need to be mounted into studs?
No. Many lightweight accessories can be installed using appropriate wall anchors. But when a stud is available in a suitable location, mounting directly to it generally provides stronger support.
Can you install bathroom accessories on tile?
Yes, tile can be drilled for many installations, but the installer needs the right tools and technique. The type of tile and what’s behind it matter.
Should a towel bar be mounted into a stud?
If a stud is conveniently located where the towel bar needs to go, it’s a good mounting option. If there isn’t one, an appropriate wall anchor may be suitable depending on the accessory and expected load.
Can I use a towel bar as a grab bar?
No. A towel bar isn’t a substitute for a properly installed grab bar. If someone may rely on the bar for support, use hardware designed for that purpose and make sure it has an appropriate structural attachment.
What should I do before getting an estimate?
Make a list of everything you want installed, take a few photos of the bathroom and note whether the walls are drywall, tile or another material. If you’re replacing existing hardware, mention that as well. That gives the installer a much better idea of the actual scope before the visit.
WINGMAN SERVICES
Rather have Wingman do it?
Get a quote and let a pro handle it. Your weekend stays yours.
